Registe-se, faça a sua apresentação e terá acesso total ao TX&RX Fórum. ___________________________ Apresente-se dizendo quem é, escreva algo sobre si. Exemplo: Nome, indicativo, nome de estação, localidade, o que mais gosta de fazer no mundo das radio-comunicações e outras coisas que ache importante para a sua apresentação. Se é novato não tenha vergonha de o dizer, pois cá estamos para o ajudar.
___________________________ O TX&RX Fórum destina-se à publicações de mensagens "posts" relacionados com todos os assuntos sobre Radio Frequência. Essas mensagens têm como objectivo promover ideias, experiências, projectos, esclarecer duvidas, divulgação de actividades e publicações de novidades sobre Radio Comunicações.
Divirta-se!!
___________________________ O TX&RX Fórum destina-se à publicações de mensagens "posts" relacionados com todos os assuntos sobre Radio Frequência. Essas mensagens têm como objectivo promover ideias, experiências, projectos, esclarecer duvidas, divulgação de actividades e publicações de novidades sobre Radio Comunicações.
Divirta-se!!
Divulgação
KC901H Analyzer
Página 1 de 1
KC901H Analyzer
por ALF007 Seg 5 Jan 2015 - 7:08
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Main Features
- Transmission test (tuning diplexer and filter, testing amplifier and inspecting the directivity of antennas)
- Reflection test (examining quality of antenna system and feeder system, a tracking receiver is used to improve the noise performance)
- Spectrum display and field strength detection (inspecting radio frequency emissions / searching interference sources)
Applications
KC901H is designed for debugging RF devices, such as diplexer, filter, amplifier, splitter, combiner, and testing standing wave of antennas and insertion loss of feeders.
To test a transmitter or receiver, add external attenuator to extend input power range
Perform field strength measurement and interference detection in most frequencies.
Detect the fault point of cables / speed factor measurement.
A standard packing includes:
KC901H analyzer 1
Charger 1
Strap 1
User manual 1
DELUXE kit plus
Car charger
Filter kit
RF adapter kit
3-Year warranty
size：230×113×46mm（length, width , height ）
weight（including battery）：Net weight of host <1.5kg
Total weight ≈2.0kg
Frequency range:
Transmission test 100 KHz…3GHz (0…100 kHz is allowed)
Reflex test 1.5MHz…3GHz (0…1.5MHz is allowed)
Output level (typical value):+7dBm or 5mW（1MHz——2GHz）
+0dBm（2——3GHz）
Input sensitivity:
superior to -107dBm or 1μV（50KHz——1GHz）
superior to -87dBm or 10μV（1——2.2GHz）
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Damaged level:
all the RF ports DC15V，+20dBm
Test range 0f S21 (typical value):
110dB（1MHz——1GHz，about 60dB in 100KHz ， about 120dB in 435MHz）
80dB（1——2.2GHz），60dB（2.2——2.5GHz）
Resolution:
Frequency is 1Hz, level is 0.1 dB
(Typical value,@25℃,battery voltage≥7.5V)
±1.5dB（spectrum measurement，REF=20dBm）
±3dB（spectrum mode and field mode）±（1+0.05L）dB（in S21test，when calibration is directly connected and insertion loss L≤60dB）
+2dB，-3dB*（loss，simple calibration, 25MHz≤f≤1GHz，6dB≤RL≤18dB）
*No guarantees. Use external bridge to meet more requirements referring to 5.2.5
Internal bridge directionality（typical value)：
18dB（3MHz——15MHz，1.2GHz——2GHz）
30dB（15MHz——1.2GHz）
16dB（2GHz——3GHz）
Frequency stability:
±1ppm/year@25℃
Supply voltage:
11.5V…32V（external power ）；7.2…8.4V（battery）
105V…230V，50/60Hz（power adapter input）
Battery endurance（typical value，@25℃）：
3hours （spectrum ,field, signal source）；1hour （S21 or S11 includes insertion loss test）
20hours （in STOP mode，BL=1）
Humiture range：
0…45℃（normal temperature range ）
10%…90%R.H.，no condensation
size：
230×113×46mm（length, width , height ）
weight（including battery）：Net weight of host <1.5kg
Total weight ≈2.0kg
- USER MANUAL
- Link
Main Features
- Transmission test (tuning diplexer and filter, testing amplifier and inspecting the directivity of antennas)
- Reflection test (examining quality of antenna system and feeder system, a tracking receiver is used to improve the noise performance)
- Spectrum display and field strength detection (inspecting radio frequency emissions / searching interference sources)
Applications
KC901H is designed for debugging RF devices, such as diplexer, filter, amplifier, splitter, combiner, and testing standing wave of antennas and insertion loss of feeders.
To test a transmitter or receiver, add external attenuator to extend input power range
Perform field strength measurement and interference detection in most frequencies.
Detect the fault point of cables / speed factor measurement.
A standard packing includes:
KC901H analyzer 1
Charger 1
Strap 1
User manual 1
DELUXE kit plus
Car charger
Filter kit
RF adapter kit
3-Year warranty
size：230×113×46mm（length, width , height ）
weight（including battery）：Net weight of host <1.5kg
Total weight ≈2.0kg
Frequency range:
Transmission test 100 KHz…3GHz (0…100 kHz is allowed)
Reflex test 1.5MHz…3GHz (0…1.5MHz is allowed)
Output level (typical value):+7dBm or 5mW（1MHz——2GHz）
+0dBm（2——3GHz）
Input sensitivity:
superior to -107dBm or 1μV（50KHz——1GHz）
superior to -87dBm or 10μV（1——2.2GHz）
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Damaged level:
all the RF ports DC15V，+20dBm
Test range 0f S21 (typical value):
110dB（1MHz——1GHz，about 60dB in 100KHz ， about 120dB in 435MHz）
80dB（1——2.2GHz），60dB（2.2——2.5GHz）
Resolution:
Frequency is 1Hz, level is 0.1 dB
(Typical value,@25℃,battery voltage≥7.5V)
±1.5dB（spectrum measurement，REF=20dBm）
±3dB（spectrum mode and field mode）±（1+0.05L）dB（in S21test，when calibration is directly connected and insertion loss L≤60dB）
+2dB，-3dB*（loss，simple calibration, 25MHz≤f≤1GHz，6dB≤RL≤18dB）
*No guarantees. Use external bridge to meet more requirements referring to 5.2.5
Internal bridge directionality（typical value)：
18dB（3MHz——15MHz，1.2GHz——2GHz）
30dB（15MHz——1.2GHz）
16dB（2GHz——3GHz）
Frequency stability:
±1ppm/year@25℃
Supply voltage:
11.5V…32V（external power ）；7.2…8.4V（battery）
105V…230V，50/60Hz（power adapter input）
Battery endurance（typical value，@25℃）：
3hours （spectrum ,field, signal source）；1hour （S21 or S11 includes insertion loss test）
20hours （in STOP mode，BL=1）
Humiture range：
0…45℃（normal temperature range ）
10%…90%R.H.，no condensation
size：
230×113×46mm（length, width , height ）
weight（including battery）：Net weight of host <1.5kg
Total weight ≈2.0kg
- USER MANUAL
- Link
__________________________________
Qualquer duvida exponha no Fórum.
Vamos ajudar-lhe.
Com as suas duvidas, vamos aprender!
Por isso existe o [Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
73 e tudo de bom
__________________________________________________
Convido-lhe a seguir e conviver.
Divirta-se!
Obrigado.
- TX&RX DX Chat no Telegram
- Siga o Facebook TX&RX Fórum
- TX&RX DX Grupo
ALF007- Administrador Fundador
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos
