TX RX Fórum
Station Master DeLuxe – microHam Popup110


Participe do fórum, é rápido e fácil

TX RX Fórum
Station Master DeLuxe – microHam Popup110
TX RX Fórum
Gostaria de reagir a esta mensagem? Crie uma conta em poucos cliques ou inicie sessão para continuar.
Registe-se, faça a sua apresentação e terá acesso total ao TX&RX Fórum. ___________________________ Apresente-se dizendo quem é, escreva algo sobre si. Exemplo: Nome, indicativo, nome de estação, localidade, o que mais gosta de fazer no mundo das radio-comunicações e outras coisas que ache importante para a sua apresentação. Se é novato não tenha vergonha de o dizer, pois cá estamos para o ajudar.
___________________________ O TX&RX Fórum destina-se à publicações de mensagens "posts" relacionados com todos os assuntos sobre Radio Frequência. Essas mensagens têm como objectivo promover ideias, experiências, projectos, esclarecer duvidas, divulgação de actividades e publicações de novidades sobre Radio Comunicações.
Divirta-se!!


Divulgação


Station Master DeLuxe – microHam

Ir para baixo

Station Master DeLuxe – microHam Empty Station Master DeLuxe – microHam

Mensagem por ALF007 Qua 17 Dez 2014 - 1:17

[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]

Station Master DeLuxe™ is big brother of regular Station Master™ and has all its capabilities but provides more ergonomic user interface with large 240×64 LCD, a lot of buttons and stacked antenna support.  Station Master DeLuxe is designed for large single radio stations with multiple rotators and stacks, advanced SO2R stations requiring full control and ergonomic setup for each radio position, and all multi station setups.

The thing that makes Station Master DeLuxe (SMD) really different, is network operation. Multiple SMD units can be linked over a reliable, low latency “uLink” bus (RS-485) independent of the computer LAN network. The uLINK bus supports up to 31 SMDs (15 SO2R operating positions or 31 single radio operating positions).  Each linked SMD can simultaneously control up to 128 uLink modules.  The total length of the uLINK bus can be up to 1.2km (4000ft) using CAT5 cable – enough to comfortably link a complete multi-op station including the antenna farm.  The uLINK modules are small, remote, dedicated function boxes – relay outputs module, RS232 port module, rotator control module, and stepper motor module, to control devices like antenna switches, stack switches, receive antennas switch boxes, rotator controllers, motors, matching networks, and more.

Station Master Deluxe includes a user configurable system of hierarchical priorities and lockouts which allows sharing final devices by multiple stations without collisions and damage.


Highlights:

- Fully stand alone operation, independent of the computer and LAN.
- Compatible with all microHAM “keyers”.  Advanced integration with MKII and MK2R+.
- Maintains separately three antenna paths for: RX1, RX2, and TX.
- Support for stacked antennas including complex stacking topologies (e.g., stacked stacks).
- Intelligent rotator control including parallel control of multiple rotators, automatic sequenced control of rotators on the same tower, rotator over rotator, or rotator on rotary tower installations.
- Special support for receive antennas (sharing one antenna among multiple stations)

[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]

General:

- Programmable Antenna, BPF, Rotator and PA controller
- Twenty (20) programmable relay outputs for local use
- Integrated level converter for transceiver CAT control port
- Decodes all frequencies of connected transceiver, including 75m, 6m, VHF and UHF
- Unlimited number of custom defined frequency segments “bands”
- Single USB connection to computer
- Stand alone operation
- Internal Rotator control
- Virtual Rotators function
- Separate RX/RX2/TX antenna selection support
- Automatic Antenna Scan function
- Unlimited number of custom defined sequencer outputs
- Automatic power amplifier support
-Fully compatible and simple integration with microHAM “keyers” (microKEYER, DigiKeyer, - CW Keyer, microKEYER II, and MK2R). Advanced integration with  microKEYER II and MK2R(+).
- Proprietary SteppIR and UltraBeam support for selective automatic tuning and protection
- Hot Switch protection with user defined timing
- TX Inhibit support for Yaesu, Ten-Tec and Elecraft K3 transceivers
- Receive only antenna support
- Optical isolation from computer
- PS/2 keyboard or keypad with dual control of Station Master Deluxe and microHAM “keyer”
- Integrated chokes and filters for maximum RFI resistance
- Metal/Aluminum case, powder coated and silk screened
- Free, no time limit firmware/software upgrades via Internet

Radio control:

- Integrated level converter for CI-V, FIF-232, IF-232, or RS-232
- Up to 57600 Baud with fake handshake support
- Supports most Elecraft, Icom, Kenwood, Ten-Tec, Yaesu and other radios
- iLINK connectivity to microKEYER II and MK2R(+)

Control Port A:

- Ten (10) programmable relay outputs
- Configurable  common ground, 13.8V positive, external power, max. + 24V
- Programmable break-before-make delay
- Compatible with all remote antenna switches using common ground or positive control

Control Port B:

- Six (6) programmable relay outputs
- Configurable common ground, 13.8V positive, external power max. + 24V
- Compatible with all automatic BPF on the market
- Four (4) programmable relay outputs with both poles of relay contact available

Internal Rotator Controller:

- Three (3) programmable relay outputs
- Both poles of relay contact available
- Configurable support for BRAKE or SPEED control
- Support for multi-turn rotators
- Support for rotators with analog (pot) or discrete (pulse) azimuth read back
- Programmable software limit switches
- Dead zone definition
- Target finding strategy selection for optimal handling
- Support for “slipping” rotators
- Four memories for most wanted azimuths
- Automatic azimuth control from logger

Virtual Rotator Control:

- Unlimited number of antennas can be joined to Virtual Rotator
- Programmable azimuth ranges for each Virtual Rotator antenna
- Automatic azimuth control from logger
- Unlimited number of Virtual Rotators per Band

Power Amplifier Control:

- Automatic tuning for CI-V controlled automatic linear amplifiers (Icom PW1, Expert SPE, - OM-Power, Tokyo-HP)
- Automatic band switching for BCD controlled amplifiers (Yaesu VL-1000, FL-7000)
- Support for QSK Power Amplifiers
- Support for “shared” Power Amplifiers

uLINK Features:

- Allows control of all station devices (antennas, rotators, amplifiers) by multiple operating positions
- Virtually unlimited number of configurable relay outputs
- Virtually unlimited number of rotators
- Virtually unlimited number of serial port control devices
- Support for stacked antennas including complex topologies (e.g., stacked stacks)
- Intelligent rotator control including linked/slave rotators like rotator on rotary tower
- Configurable system of protections and lockouts which allow sharing among multiple stations without collisions and damage
- Special handling of “shared” devices – e.g., muti-band antennas, shared amplifiers, - - - - SteppIR and UltraBeam antennas


Specifications

USB:   USB 2.0 Full speed, USB 1.1 compatible

Power consumption:  USB – less than 100mA, Power supply – max.1.8A at +13.8V (max. +16V)

CAT:     RxD, TxD – max. 57600 Baud, RTS fixed level output max.1mA
Levels: TTL, inverted TTL, open collector bus, RS232

Serial:    RS232 levels, RTS fixed level output max.1mA, up to 9600 baud

PA CI-V:   open collector bus max.40mA, up to 9600 baud

All relay outputs:  30VDC, 48VAC, max.2A

External PORT A power:   max. +24V/1.3A

External PORT B power:   max. +24V/400mA

PS/2 consumption:   max. 200mA at +5V

Rotator analog input:  10K ohm, max. +/-12V

Rotator pulse input:   active when grounded,  max. +24V/5mA

Rotator reference output:  9V, max. 20mA

PA Keying output:   open collector, max.+45V/800mA

PA Keying input:   active when grounded,  max.+24V/5mA

PA ON/OFF control:   +12V, max.100mA

Dimensions:    W 305mm (12″) x H 90mm (3.54″) x D 132mm (5.20″)

Weight:    1.8 kg (4 lbs)


[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]



- Fonte

__________________________________
Qualquer duvida exponha no Fórum.
Vamos ajudar-lhe.
Com as suas duvidas, vamos aprender!
Por isso existe o
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]  


O chat é no Telegram - Link de convite
- [Tens de ter uma conta e sessão iniciada para poderes visualizar este link]
- [Tens de ter uma conta e sessão iniciada para poderes visualizar este link]
- [Tens de ter uma conta e sessão iniciada para poderes visualizar este link]

73 e tudo de bom

__________________________________________________

Convido-lhe a seguir e conviver.
Divirta-se!
Obrigado.


- TX&RX DX Chat no Telegram 
- Siga o Facebook TX&RX Fórum
- TX&RX DX Grupo
ALF007
ALF007
Administrador Fundador


Ir para o topo Ir para baixo

Ir para o topo

- Tópicos semelhantes

 
Permissões neste sub-fórum
Não podes responder a tópicos