Registe-se, faça a sua apresentação e terá acesso total ao TX&RX Fórum. ___________________________ Apresente-se dizendo quem é, escreva algo sobre si. Exemplo: Nome, indicativo, nome de estação, localidade, o que mais gosta de fazer no mundo das radio-comunicações e outras coisas que ache importante para a sua apresentação. Se é novato não tenha vergonha de o dizer, pois cá estamos para o ajudar.
___________________________ O TX&RX Fórum destina-se à publicações de mensagens "posts" relacionados com todos os assuntos sobre Radio Frequência. Essas mensagens têm como objectivo promover ideias, experiências, projectos, esclarecer duvidas, divulgação de actividades e publicações de novidades sobre Radio Comunicações.
Divirta-se!!
___________________________ O TX&RX Fórum destina-se à publicações de mensagens "posts" relacionados com todos os assuntos sobre Radio Frequência. Essas mensagens têm como objectivo promover ideias, experiências, projectos, esclarecer duvidas, divulgação de actividades e publicações de novidades sobre Radio Comunicações.
Divirta-se!!
Divulgação
MFJ-2982 – Vertical Antenna – 80-6M
TX RX Fórum :: TX&RX Fórum :: HF :: Antenas - HF
Página 1 de 1
MFJ-2982 – Vertical Antenna – 80-6M
por ALF007 Ter 16 Set 2014 - 4:17
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
No trees, no problem! 31’ self-supporting vertical sets up in minutes, collapses to only 3.8’ ; perfect for RVs, vacations, field day, or as your grab-and-go kit.
More than a simple “flagpole”, this complete antenna system includes adjustable base-loading coil, Guanella balun, and counterpoise.
Rugged Vertical Element: stout 1 ¾” base supports twist-lock fiberglass sections — telescope to 31’in seconds. Despite its length, it’s so light one person can raise or lower it easily, even in wind. Special light-weight wire reduces weight distributed in top sections for improved rigidity and reduced sway.
Base Loading Network: Air-wound high efficiency loading coil is continuously tapped to provide full coverage 3.5 – 7 MHz. On 17 M, the inductor configures as a ⅝ – wave for added gain. On 20 M, adding inductance improves the load presented to your tuner. The base tuning unit is RF – isolated and can be attached to any supporting structure.
Portable Counterpoise: No guess work or ground rods needed, just connect four insulated 12’ radial wires to the tuning unit and lay them on ground.
Guanella Balun: Lab rated with up to 30 dB common-mode suppression, the balun prevents feedline, radio, and you from becoming part of the antenna!
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Easy Wire Handling: Detachable wire spooler makes handling/storing wire easy during setup/takedown. Attaches to antenna body for storage.
Add Wire: Use conductive eyebolt at antenna top to install wires for an inverted “L” or a “T” to enhance low frequency coverage.
Corrosion Resistant: All hardware is aluminum, stainless steel, or corrosion protected to ensure long life.
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Low SWR: No tuner is needed for 80 / 75 / 60 / 40 / 17 Meters, because radiator length is fixed at 31’. Operation on 30 / 20 / 15 / 12 / 10 / 6M requires an ATU.
PowerRating: MFJ-2982 components are safety-rated for 600 Watts PEP on SSB/CW.
- Manual
No trees, no problem! 31’ self-supporting vertical sets up in minutes, collapses to only 3.8’ ; perfect for RVs, vacations, field day, or as your grab-and-go kit.
More than a simple “flagpole”, this complete antenna system includes adjustable base-loading coil, Guanella balun, and counterpoise.
Rugged Vertical Element: stout 1 ¾” base supports twist-lock fiberglass sections — telescope to 31’in seconds. Despite its length, it’s so light one person can raise or lower it easily, even in wind. Special light-weight wire reduces weight distributed in top sections for improved rigidity and reduced sway.
Base Loading Network: Air-wound high efficiency loading coil is continuously tapped to provide full coverage 3.5 – 7 MHz. On 17 M, the inductor configures as a ⅝ – wave for added gain. On 20 M, adding inductance improves the load presented to your tuner. The base tuning unit is RF – isolated and can be attached to any supporting structure.
Portable Counterpoise: No guess work or ground rods needed, just connect four insulated 12’ radial wires to the tuning unit and lay them on ground.
Guanella Balun: Lab rated with up to 30 dB common-mode suppression, the balun prevents feedline, radio, and you from becoming part of the antenna!
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Easy Wire Handling: Detachable wire spooler makes handling/storing wire easy during setup/takedown. Attaches to antenna body for storage.
Add Wire: Use conductive eyebolt at antenna top to install wires for an inverted “L” or a “T” to enhance low frequency coverage.
Corrosion Resistant: All hardware is aluminum, stainless steel, or corrosion protected to ensure long life.
[Tens de ter uma conta e sessão iniciada para poderes visualizar esta imagem]
Low SWR: No tuner is needed for 80 / 75 / 60 / 40 / 17 Meters, because radiator length is fixed at 31’. Operation on 30 / 20 / 15 / 12 / 10 / 6M requires an ATU.
PowerRating: MFJ-2982 components are safety-rated for 600 Watts PEP on SSB/CW.
- Manual
ALF007- Administrador Fundador
Tópicos semelhantes» MFJ-1799 Vertical Antenna
» G8JNJ Broadband HF Vertical Antenna
» ZeroFive 10-40 Meter Groundplane Vertical - Antenna Review
» Como partilhar antena de CB e SDR
» Na vertical com o PMR265
» G8JNJ Broadband HF Vertical Antenna
» ZeroFive 10-40 Meter Groundplane Vertical - Antenna Review
» Como partilhar antena de CB e SDR
» Na vertical com o PMR265
TX RX Fórum :: TX&RX Fórum :: HF :: Antenas - HF
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos
